Cisco IOS RSA Key
Generate a SSH Key on Linux default location for the private and public key is: ~/.ssh/ for the next step, SSH needs to be configured and working on the Cisco IOS Router...
Tag: cisco
TACACS GUI with LDAP
Download OVA from tacacsgui.com and import it into your hypervisor to change the ip address of the server go into the console of the server and login in, default username/password is tacgui/tacgui...
Cisco ASA Traceroute
Allow Tracert through the ASA Allow ICMP/Time-Exceeded and Time/Unrechable from outside Make ASA visable in traceroute
QOS – shape all traffic expect specific ip/subnet
This config in this lab will shape all output traffic on wan link that matches a deny statement in the ACL to 100mbit, in this case it will be Iperf Server 1...
QOS – Shape traffice based on timebased ACL
The config in this test lab will shape the upload on the internet traffic to 300mbit at normal hours, and to 100mbit between 20:00 to 21:00. To limit download is the same...
Load-Interval
About: Load data is gathered on every interface every 5 seconds, this data is used to calculate a weighted-average over time and then shown on the interface, the load-interval command sets the...
Cisco IOS – Etherchannel
Etherchannel Modes Etherchannel Mode Description PAgP Cisco Proprietary Protocol LACP Open Standard used by most Vendors ON Forced to form Etherchannel without using negotiation protocol More Details about specific mode Mode Protocol...